go to Truck Tarps
Check out our Aluminum Fender Mount brackets for Trucks
go to Truck Tarps
go to Truck Tarps go to Tough Tarps go to Pool Covers go to Boat Covers go to Industrial Sewing & Heat Sealing go Back to Index Page
Go to Cart Return to D.S. home page Request a Catalog go to Merritt Products      

Instructions for Measuring your Custom Dry-Dock Cover


step1
Distance from 12" below Waterline to Bow of Frame
  • Start measuring at the bow 12" below the waterline
  • Measure up and over the top of bow to where the frame begins
  • Write this measurement in Square {short description of image} on your Dry-Dock Cover form
step1
Distance from 12" below Waterline to Bow of Frame

  • Continue measuring the distance from one rib to the next until all the distances are measured
  • Write these measurements in the corresponding {short description of image} on your Dry-Dock Cover form


step2
Distance from Bow of Frame to First Rib

  • Start measuring on the bow of the frame
  • Measure to the center joint of the fist rib
  • Write this measurement in {short description of image} on your Dry-Dock Cover form
step4
Distance from Last Rib to the Stern
  • Start measuring at the center joint of the last rib to the stern of the frame
  • Write this measurement in the corresponding {short description of image} on your Dry-Dock Cover form
 
Returns to Homepage

   PO Box 8983, New Haven CT 06532

click to return To Boat Covers index
 

Copyright D.S.Sewing 1999-. All rights reserved

to page 4 of 9 to page 6 of 9

page 5 of 9