go to Truck Tarps
go to Truck Tarps
go to Truck Tarps go to Tough Tarps go to Pool Covers go to Boat Covers go to Industrial Sewing & Heat Sealing go Back to Index Page
Return to D.S. home page Request a Catalog go to Merritt Products      

Instructions for Measuring your Custom Dry-Dock Cover

step5
Distance from Stern to 12" below Waterline
  • Start measuring at the stern of the frame Measure to 12" below the stern waterline.
  • Write this measurement in square on your Dry-Dock Cover form.
step7
Width of Dry-Dock Cover, Port to Starboard
  • Start measuring 12" inches below the port waterline
  • Measure up and over the first rib End measurement 12" below the starboard waterline
  • Write this measurement into on your Dry-Dock Cover form
step6
Ridgepole Length, Bow to Stern
  • Start measuring from the bow of the frame
  • Measure up and along the length of the ridgepole to the stern
  • End your measurement at the stern of the frame
  • Write the measurement in the marked Ridgepole Length on the Dry-Dock Cover form
step8
Repeat Width of Dry-Dock Cover, Port to Starboard
  • Repeat step seven for each rib
  • Write each measurements in the corresponding on your Dry-Dock Cover form
  • Continue until you have measured all ribs of the frame
 
Returns to Homepage

   40 Hockanum Blvd Vernon, CT 06066

 click to return To Boat Covers index

Copyright D.S.Sewing 1999-. All rights reserved

to page 5 of 9 to page 7 of 9

page 6 of 9